The application of CAD/CAM technology on the reconstruction of the thyroid cartilage
-
摘要: 目的:探讨计算机辅助设计/计算机辅助制造(CAD/CAM)技术在甲状软骨缺损的个性化修复重建中的价值。方法:选取30只成年新西兰大白兔(雌雄不限),随机分为2组。A组在术前行喉部CT扫描,三维重建甲状软骨成像,手术切除任意一侧甲状软骨,缺损处植入运用CAD/CAM技术和镜像技术制备的个性化修复材料;B组手术切除任意一侧甲状软骨,缺损处植入大致按照实验动物单侧甲状软骨制作的非个性化修复材料。术后通过大体观察、电子喉镜检查等观察实验动物的喉腔情况。结果:A组实验动物喉腔黏膜无炎症、无肉芽生长,声带闭合良好,喉腔通畅、无塌陷现象发生;B组喉腔黏膜无炎症,第3周喉前连合处见肉芽生长,第7周见术侧喉腔轻度塌陷,喉腔欠通畅,声带闭合欠佳。结论:运用CAD/CAM技术制备的个性化修复材料比非个性化材料能起到更好的喉支撑作用。CAD/CAM技术为术前设计提供了个性化实体模型,提高了手术的精确性,节省了手术时间,降低了手术并发症。
-
关键词:
- CT扫描 /
- 计算机辅助设计/计算机辅助制造 /
- 甲状软骨 /
- 个性化重建
Abstract: Objective: To explore the value of computer-aided design/computeraided manufacturing (CAD/CAM) technology for individual reconstruction of the thyroid cartilage defects. Method: Select the 20 New Zealand white rabbits (male or female). Randomly divided into two groups. Group A in the pre-operative CT scan of the throat, three-dimensional reconstruction of the thyroid cartilage imaging, surgical removal of either side of the thyroid cartilage, defect implanted in the use of CAD/CAM technology and mirror technology to produce personalized restorative materials; Group B surgical resection either side of the thyroid cartilage, defect implanted production of non-personalized probably according to the experimental animals unilateral thyroid cartilage repair materials. After surgery by gross observation, electronic laryngoscopy observed experimental animals throat. Result: General check and electronic laryngoscopy show: the use of CAD/CAM technology to prepare the individual repair materials throat plays better supporting role than the non personalized materials.Conclusion: CAD/CAM technology before surgery designed to provide a personalized solid model to improve the accuracy of the surgery, time saving surgery to reduce surgical complications. -
[1] HERLIN C,KOPPE M,BEZIAT J L,et al.Rapid prototyping in craniofacial surgery:using a positioning guide after zygomatic osteotomy-A case report[J].J Craniomaxillofac Surg,2011,39:376-379.
[2] SABOL J V,GRANT G T,LIACOURAS P,et al.Digital image capture and rapid prototyping of the maxillofacial defect[J].J Prosthodont,2011,20:310-314.
[3] CHRZAN R,URBANIK A,KARBOWSKI K,et al.Cranioplasty prosthesis manufacturing based on reverse engineering technology[J].Med Sci Monit,2012,18:MT1-6.
[4] CHING W C,GOH R C,LIN C L,et al.Aesthetic restoration of fronto-orbital deformity with prefabricated implant utilizing modeling clay and rapid-prototyping technology[J].Aesthetic Plast Surg,2011,35:1176-1179.
[5] LIN C C,LO L J,LEE M Y,et al.Craniofacial surgical simulation:application of three-dimensional medical imaging and rapid prototyping models[J].Chang Gung Med J,2001,24:229-238.
[6] 吴健有,刘静明,陈志远,等.个体化数字导板在颧眶复合体骨折中的应用[J].北京口腔医学,2011,19(1):31-34.
[7] KHALYFA A,VOGT S,WEISSER J,et al. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants[J].J Mater Sci Mater Med,2007,18:909-916.
[8] SUBBURAJ K,NAIR C,RAJESH S,et al.Rapid development of auricular prosthesis using CAD and rapid prototyping technologies[J].Int J Oral Maxillofac Surg,2007,36:938-943.
计量
- 文章访问数: 57
- PDF下载数: 43
- 施引文献: 0